User's Guide

a. SIM card slot. Insert the SIM card carefully until it clicks in to place. To release press the

SIM carefully again.

b. Restore defaults. This button is next to the SIM slot. Press it with a pointed object, like

a paper clip, to restore the unit to its factory default settings. This may be required

when you want to build a new network configuration, or when the administrator

password has been lost.

i. Note: All web-based management settings and parameters, including those in

the “Advanced” section, are restored to their default values. The administrator

password is no longer valid. All other user names are deleted. All personal

configuration settings are deleted, including all SMS messages in the

GlobeSurfer III+ memory. Messages on the SIM card remain unchanged.

4. External Antenna connector. Enables the connection of an MC-Card style external Antenna.

5. Local Area Network and Wide Area Network (LAN/WAN) Ethernet port (10/100 Mbit/s). When

configured for WAN support this is also the ADSL failover support interface.

6. Local Area Network (LAN). Port for LAN Ethernet cables to be connected directly into the unit.

The LAN connection handles 10/100 Mbit/s. This provides an Ethernet LAN from the GlobeSurfer

III+ to your local computers.

7. USB Port. Connecting an external hard disk drive (File Server) or USB printer (Printer Server) to

this port extends the functionality of the GlobeSurfer.

a. Please note: This port is only configured for File Server and Print Server functionality –

any other USB device connected to the GlobeSurfer may not work, and is not

supported. Please also note, any external hard disk drive must be formatted in FAT32

or FAT16 file format – NTFS is supported in read-only mode

8. Telephone. Plug your home telephone into the unit. Base-station telephones with wireless

handsets are supported. This port supports a load of 1 standard telephone. When connecting

more than one telephone unit ensure that the load on this port does not exceed 1 standard

telephone otherwise telephony function may be affected.

9. DC 5V Input socket: plug in the power adapter DC cable.

Tip: Leave the unit on so that you can connect to the Internet at the push of a button, or automatically

if that option is selected.