User's Guide

41
Administration Basics
The basic configuration of GlobeSurfer III+ is done in the ‘Quick Setup’. There may be other
configuration settings required in everyday use. These are accessed using the web-based management
console as described below.
For advanced users and network administrators there are many other settings and parameters that you
can change. For example: to set up Virtual Private Networks (VPN), to enable corporate grade security
settings, system monitoring and diagnostics. These settings are described in the ‘Reference Manual’.
Quick Setup
You can use the ‘Quick Setup’ to change the main settings needed to use GlobeSurfer III. The following
settings can be changed:
Language
Select the language for GlobeSurfer III
Note: The current language setting will be restored if you do not apply the settings.
Telephony
Select the country for the telephone handset interface.
UMTS Setup
 Access point name: as provided by your mobile operator.
 UMTS Connect Method:
+