User's Guide

35
Upgrading From a Local Computer
To upgrade GlobeSurfer III+ using a locally stored file:
1. Login to the GlobeSurfer III+ management console, if you have not done so already.
2. Select the ‘System setup’ icon.
3. Click ‘Firmware upgrade’.
4. Enter the path of the software image file, or click ‘Browse’ to browse for the file on your PC and
click ‘OK’ when ready: the file will load into GlobeSurfer III+
Note: You can only use files with a .rmt extension to perform the firmware upgrade.
5. When completed, a confirmation dialog will ask if you want to upgrade to the new version.
6. Click ‘OK’ to confirm. The upgrade process can take many minutes. While the upgrade is in progress
the front panel LEDs will indicate this.
GlobeSurfer III+ will automatically reboot and the new firmware version will run, maintaining your
custom configurations and settings.