User's Guide

30
 Click ‘Connect’ or ‘Disconnect’ to manually connect or disconnect to or from the UMTS network.
Note: The ‘Connection status’ page is refreshed at regular intervals in order to update the information
displayed. You can disable the automatic refresh by clicking ‘Automatic refresh off’ on the ‘Connection
status’ page but if you do that you will have to click ‘‘Refresh’ whenever you want to see the current
status.
Note: The connection time and the number of sent and received bytes shown here may differ from that
shown on your bill.
Login to the management console
If you want to change settings or use SMS then you have to login to GlobeSurfer III.
1. From your browser, type in: http://192.168.1.1
2. Enter your user name and password to login to the GlobeSurfer III+ management console.
3. Click ‘OK’. The ‘Home Page (Basic)’ is displayed. The options available to you are as follows:
+