User's Guide

17
Step 6: Enter the PIN code.
The PIN code is specific to your SIM card.
You are now asked to key-in the PIN code:
Enter the PIN code.
Tick the ‘Save PIN’ checkbox: then you will not be asked to enter the PIN again.
Click ‘OK’.
When you get the ‘PIN OK’ response then click ‘OK’.
The Connection page is displayed.
Step 7: Making your first call
As soon as the Internet LED stops flashing your GlobeSurfer III+ has registered with a mobile network.
(The web-home page also shows the name of the operator and the signal quality). You can now make
your first call from your home telephone using your mobile subscription.
Tip: You should adjust the position of the GlobeSurfer III+ to achieve the best possible reception. This is
indicated by the signal quality displayed on the web-home page. You can also use the front panel Signal
Monitoring mode (see Signal Strength Monitor - Checking Signal Strength on page 6).
+