User's Guide

55
Adding wireless computers to MAC filtering
1. Enter the ‘Advanced Mode’ and then chose ‘Local Network’ _ and ‘Wireless’ _
from the menu tab and sub-menu.
2. Select ‘Advanced’ from the right hand menu tabs _ and finally the ‘Wireless’
tab _ to open ‘LAN Wireless properties’.
3. Select ‘New MAC address’.
4.EntertheMACaddressoftheWLANcomputerandclick‘OK’.
5. Select ‘MAC filtering mode’: Click ‘Allow’ or ‘Deny’.
(Select ‘Disable’ if you want to disable MAC filtering.)
Z08.209_UG_GSIII_V4.indd 55 14-08-2008 13:56:51