User's Guide

40
GlobeSurfer
®
III User guide
4. You can select the ‘Flash SMS’ - ‘Enabled’ checkbox if you want the message
text displayed immediately when received (not supported by all phones).
5. Click ‘Send SMS’ when ready to send.
Alternatively you can:
•Click‘Saveasdraft’tosaveintheDraftsfolderforcompletionlater.
•Click‘Saveastemplate’tosavethemessageasatemplateforfutureuse.
Tip: GlobeSurfer
®
III supports concatenated SMS, which works as follows; if you
want to send a longer than standard SMS of 160 characters you can type the
almost the equivalent of 4 standard messages (up to 609 characters). When you
send the message it will counted as separate messages.
Note: When you send an SMS, you may incur a charge depending on your sub-
scription with your mobile operator.
Sent SMS text messages
The ‘Sent’ tab shows the status of sent messages.
The sent SMS is first put in the outbox folder and moved to the sent folder when
successfully sent.
Tip: Select the ‘Sent’ tab to check that the message has been sent. If the mes-
sage is still in the Outbox there is probably something wrong with the connection.
Z08.209_UG_GSIII_V4.indd 40 14-08-2008 13:56:37