User's Guide

37
4. Enter the path of the software image file, or click ‘Browse’ to browse for the file
onyourPCandclick‘OK’whenready:thelewillloadintoGlobeSurfer
®
III
Note: You can only use files with a .rmt extension to perform the firmware
upgrade.
5. When completed, a confirmation dialog will ask if you want to upgrade to the
new version.
6.Click‘OK’toconrm.Theupgradeprocessshouldtakebetweenonetove
minutes depending on the size and scope of the firmware changes.
GlobeSurfer
®
III will automatically reboot and the new firmware version will run,
maintaining your custom configurations and settings.
Z08.209_UG_GSIII_V4.indd 37 14-08-2008 13:56:30