User's Guide

Restoring the factory default settings

You can restore the factory default conﬁguration for GlobeSurfer

III when you

want to build a new network from scratch, or when changes to the network have

become unclear.

Note: All web-based management settings and parameters, not only those in

the Advanced section, will be restored to their default values. This includes the

administrator password: the user-speciﬁed password will no longer be valid.

All personal conﬁguration settings are deleted, including all SMS messages in the

unit. Messages on the SIM card remain unchanged.

You can restore the factory settings as follows:

•Ontheunit:presstheRestoredefaultsbuttonunderneathusingapointed

object.

•FromtheGlobeSurfer

III Graphical User Interface:

1. Select the ‘Advanced Mode’ and then chose the ‘System’ tab

2. Select the ‘Maintenance’ followed by ‘Restore Factory Settings’ sub-tabs

3.ReadthewarningandClick‘OK’.

Then you will need to redo the Set-up as described from ‘Step 3: Connect

your computer’ on page 19.

Z08.209_UG_GSIII_V4.indd 35 14-08-2008 13:56:27