User's Guide

EVERYDAY USE

Staying connected.

You can use GlobeSurfer

III to make phone calls, surf the Internet and use e-mail

just as if your computer is always connected. There is no need to login to the

GlobeSurfer

III Graphical User Interface (within the Web Browser) to use those

features. If you want to change settings or use SMS then you have to login. See

‘Using the Graphical User Interface (within the Web Browser)’, on page 29.

If it does not connect automatically, then use the checklist below to connect your

GlobeSurfer

III to the Internet.

Step 1: Make sure that the power adapter is connected, GlobeSurfer

III is on and

the SIM card is inserted correctly.

Step 2: Open an Internet browser on your computer and click the bookmark to

GlobeSurfer

III, or type http://192.168.1.1 in the address bar.

Note: If this does not work, make sure that your computer is connected to

GlobeSurfer

III using either LAN or WLAN. If you are uncertain, check the ‘Net-

work Connections’ in ‘My Network Places’ or in the Windows

Control Panel.

Step 3:EnterthePINcode,ifrequested,andclick‘OK’.

The ‘Connection Status’ page is displayed.

Click ‘Connect’, or press the connect button on the top of your GlobeSurfer

III, to

connect to the Internet.

Z08.209_UG_GSIII_V4.indd 27 14-08-2008 13:56:18