User's Manual

9. The software will automatically be copied into Program Files\Option\GlobeTrotter
Mobility Manager. Another target folder can also be chosen during the installation
process.
10. At the end of the installation you will have to reboot the PC and if you have selected
automatic start up, the GlobeTrotter MM application will start up after the reboot.
11. Insert the Option GlobeTrotter card into the PCMCIA slot of your PC.
12. Wait until the system has recognized the card.
13. You will now be asked to register the product.
Registration is required to benefit from the warranty and customer care.
By connecting to the Internet you can register online immediately
at http://www.option.com/registration/4_3_registration.shtml
Choose Cancel if you want to register later. You will be able to start the registration
from the help menu in the main interface. When you click cancel each time you
start GlobeTrotter MM you will be asked to register.
Uninstalling the Option GlobeTrotter card and the GlobeTrotter Mobility Manager.
1. Go to the Control Panel of the operating system.
2. Open Add/Remove Programs.
3. To uninstall the GlobeTrotter card and the GlobeTrotter MM software, select
GlobeTrotter Mobility Manager and click the Remove... button. Follow the steps
of the uninstall wizard.
installation
9
This section provides step-by-step instructions on how to install the Option
GlobeTrotter card on your PC.
NOTE: For illustration purposes we show the GlobeTrotter GPRS datacard, your
datacard may look different but the process is the same.
NOTE: There are some slight differences in the installation process between
Windows 2000 and XP Pro/Home Edition. If the installation differs from the steps
described in this section, follow the instructions on the screen.
If you want to quit the Setup program without installing or uninstalling, click Cancel
and then Exit Setup to quit Setup. If you want to return to the Setup program after
having quit the installation before it was completed, follow the installation steps as
if you were installing the program for the first time.
Installing the Option GlobeTrotter card and the GlobeTrotter Mobility Manager
WARNING! DO NOT INSERT THE CARD!
It is advised to connect your PC to the mains, before starting the installation
1. Start Windows.
2. Close all applications.
3. Insert the CD-Rom into your computer’s CD-Rom drive. If auto play is enabled
the setup will start automatically.
4. If this does not happen, select the Run command from the Start menu.
5. Select the drive that contains the CD. Go to D:\GlobeTrotter Mobility Manager
Setup.exe (D: represents the CD-Rom drive).
6. Click OK to execute the file.
7. Select the language you want to install the program in.
8. The installation will start.
installation
8