User's Manual

The GlobeTrotter Mobility Manager Home Page
The Home Page is the place where you have a complete overview on everything
that the GlobeTrotter Mobility Manager can offer.
From the Home Page you can:
> Access every section of GlobeTrotter Mobility Manager (the Toolbar)
> Access every subsection (the Navigation bar)
> Overview about the status of the available network
> Indication of unread SMS
> Quick connection launch
In case you have unread SMS, these will be shown in the GTMM Home Page. A text
will inform about the number of unread messages.
In the Home Page, you have the possibility to connect directly to an available network.
Once you have created or imported a connection, this will be available for a quick
connect in the Home Page if the used network (GSM/GPRS/UMTS) is available.
getting started
11
Starting the Option GlobeTrotter card.
Slide the SIM card into the SIM card slot of the Option GlobeTrotter card and insert
the Option GlobeTrotter card into the PC Card slot of your computer. It is recom-
mended to insert the card in the top PCMCIA slot. You may have to enter the PIN
(Personal Identity Number) code if the PIN code request is activated in the SIM card.
The PIN code is usually supplied with the SIM card. If you enter an incorrect PIN
code three times in a row, you will need a PUK (Personal Unblocking Key) code
to unblock the SIM card. If this doesn’t work, contact your service provider.
Using the GlobeTrotter card for SMS and Phonebook management
During the installation of the GlobeTrotter Mobility Manager software a link is created
in the Startup folder. GlobeTrotter Mobility Manager will subsequently start every time
the computer is turned on. The GlobeTrotter Mobility Manager icon then appears in
the task bar. If the GlobeTrotter Mobility Manager software does not start automatically
when the computer is switched on, or if the GlobeTrotter Mobility Manager program
has been closed in the meantime, it can be started again in the Start menu.
Once the program has started, the PIN code will be
requested (if the PIN code request is activated on the SIM
card) in order to activate the Globetrotter card. The card
will subsequently be registered onto the network.
If the PIN code request has been disabled,
the GlobeTrotter card will be registered on the network
as soon as it is powered on.
At the end of the network registration the interface
will open and the connection will start
getting started
10