User's Manual

6. Click OK to execute the file.

7. Select the language you want to install the program in.

8. The installation will start.

The software will automatically be copied into Program Files\OPTION\Mobility

Manager. Another target folder can also be chosen during the installation process.

10.

At the end of the installation you will have to reboot the PC and if you have selected

automatically start up, the GTMM application will start up after the reboot.

11. Insert the Option GlobeTrotter card into the PCMCIA slot of your PC.

12. Wait until the system has recognized the card.

13. You will now be asked to register the product.

Registration is required to benefit from the warranty and customer care.

By connecting to the Internet you can register online immediately

at http://www.option.com/registration/4_3_registration.shtml

Choose Cancel if you want to register later. You will be able to start the registration

from the help menu in the main interface. When you click cancel each time you

start GTMM you will be asked to register.

Uninstalling the Option GlobeTrotter card and the GlobeTrotter Mobility Manager

1. Go to the Control Panel of the operating system.

2. Open Add/Remove Programs.

To uninstall the GlobeTrotter card and the GTMM software, select GlobeTrotter

Mobility Manager and click the Remove... button. Follow the steps of the unin-

stall wizard.

installation

Inserting the SIM card in the Option GlobeTrotter card

1. Verify that you have a plug-in SIM card and locate the golden connector

area on this SIM. Please make sure the golden connector is perfectly clean.

2. Look for the SIM connector on top of the Option

GlobeTrotter card.

3. Slide the SIM card with the cut corner of the SIM to

the centre of the GlobeTrotter, and with the golden

connector area on it facing to the Option

GlobeTrotter card.

Antenna

You need to eject the pop out antenna from the card in order to be able to establish

a connection

Installing the Option GlobeTrotter card and the GlobeTrotter Mobility Manager

WARNING! DO NOT INSERT THE CARD!

It is advised to connect your PC to the mains, before starting the installation

1. Start Windows.

2. Close all applications.

3. Insert the CD-Rom into your computer’s CD-Rom drive. If auto play is enabled

the setup will start automatically.

4. If this does not happen, select the Run command from the Start menu.

5. Select the drive that contains the CD. Go to D:\MobilityManagerSetup*.exe

(D: represents the CD-Rom drive).

installation