Getting Started Guide

Follow the steps below

1. Insert the SIM card and connect the Quicksilver (about 2 minutes)

• Open the Quicksilver by swiveling the cap to the right or left.

• Peel away the pull tab that extends over the USB connector from the bottom of the device.

• Use the pull tab to pull the dummy SIM from the slot.

• Insert the SIM into the slot directly above the USB connector.

• The notched portion of the SIM should go into the device first and be positioned

towards the back end of the device.

• Gently push the SIM card completely into the slot until it clicks into place and is

fully inserted.

• Inserted properly

• Not inserted properly

• Insert the Quicksilver into the laptop

Z08_193_X_GSG_ATT_150X100_land_V2.indd 7 28-08-2008 13:19:44