User's Manual

12
to the Internet difficult and the default setting “UMTS Preferred”
may not give optimum performance.
In these circumstances you can experiment by forcing the data
connection on to “UMTS Only” or “GPRS Only”. Remember to switch
back the setting to “UMTS Preferred” when conditions change.
6. ACTIVATING THE SMS CENTRE
(not all versions of GT Connect contain the SMS module)
To activate the SMS click the SMS button. On the left side you see the different folders
•
Inbox
•
Sent
•
Unsent (contains the draft SMSses)
• Figure 20 SMS Centre
Click on any of these folders to see the messages it contains. To read a message
click on it in the Sender or Date column. The text of a selected message is shown
in the grey box on the right.