User Guide

ManualsBrandsOptimal Audio ManualsCeiling LoudspeakersOptimal Audio Up 3 Ceiling Loudspeakers

Table Of Contents

Specifications

Up 3 Up 4O Up 4S Up 4 Up 6O Up 6

TYPE Full range, passive, ceiling speaker Full range, passive, ceiling speaker Two-way, full range, passive, ceiling

speaker

Two-way, full range, passive, ceiling

speaker

Two-way, full range, passive, ceiling

speaker

Two-way, full range, passive, ceiling

speaker

FREQUENCY RESPONSE (with preset) 95Hz - 15kHz ± 3dB

-10dB @68Hz

87Hz - 15kHz ± 3dB

-10dB @60Hz

110Hz - 18kHz ± 3dB

-10dB @85Hz

100Hz - 18kHz ± 3dB

-10dB @74Hz

65Hz to 18kHz ±3dB

-10dB @ 50Hz

115Hz - 18kHz ± 3dB

-10dB @80Hz

DRIVERS 3” (78mm), coated paper 4” (105mm), coated paper LF: 4” (105mm), polypropylene injection

moulded

HF: 1 (25mm) exit/0.7 (20mm) voice coil,

silk dome

LF: 4” (105mm), coated paper

HF: 1 (25mm) exit/0.7” (20mm) voice coil,

silk dome

LF: 6.5” (162mm), coated paper

HF: 1” (25mm) exit/ 0.7” (20mm) metal

dome

LF: 6.5” (162mm), coated paper

HF: 1” (25mm) exit/ 0.7” (20mm) metal

dome

RATED POWER 20W (AES) 40W (peak)

10W (AES)

15W (AES) 30W (peak) 30W (AES) 60W (peak) 60W (AES) 120W (peak) 60W (AES) 120W (peak)

NOMINAL IMPEDANCE 8Ω Tap dependent 8Ω 8Ω 16Ω 16Ω

SENSITIVITY (1W/1m) 84dB 93dB 86dB 87dB 90dB 90dB

MAXIMUM SPL 97dB (cont), 100dB (peak) 100dB (cont) 98dB (cont), 101dB (peak) 102dB (cont), 105dB (peak) 108dB (cont), 111dB (peak) 108dB (cont), 111dB (peak)

CROSSOVER n/a n/a 3.5kHz passive 3.5kHz passive 2.7kHz passive 2.7kHz passive

RECOMMENDED HIGH-PASS FILTER 24dB/octave @90Hz 24dB/Octave @80Hz 24dB/octave @85Hz 24dB/octave @90Hz 24dB/octave, 60Hz 24dB/octave @80Hz

TRANSFORMER TAPS @ 70V 15, 7.5, 3.8, 1.9W 6, 3, 1.5, 0.75W 8, 4, 2, 1, 0.5W 25, 12.5, 6.3, 3.2W 60, 30, 15, 7.5W 60, 30, 15, 7.5W

TRANSFORMER TAPS @ 100V 15, 7.5, 3.8W 6, 3, 1.5W 8, 4, 2, 1W 25, 12.5, 6.3W 60, 30, 15W 60, 30, 15W

DISPERSION (-6dB) 130˚ conical 130˚ conical 150˚ conical 120˚ conical 110˚ conical 110˚ conical

BACK CAN Zinc-plated steel n/a Zinc-plated steel Zinc-plated steel n/a Zinc-plated steel

BAFFLE ABS ABS ABS ABS ABS ABS

PROTECTIVE GRILLE Perforated steel with cloth backing Perforated steel with cloth backing Perforated steel with cloth backing Perforated steel with cloth backing Perforated steel Perforated steel with cloth backing

FIRE RATING UL94-V0 UL94-V0 UL94-V0 UL94-V0 UL94-V0 UL94-V0

CONNECTORS 4 pin Euroblock with link out Bare wires 4 pin Euroblock with link out 4 pin Euroblock with link out 4 Pin Euroblock with link out 4 pin Euroblock with link out

FITTINGS C-ring support backing plate C-ring support backing plate C-ring support backing plate C-ring support backing plate C-ring support backing plate C-ring support backing plate

DIMENSIONS (inc. Grille) (Ø) 202mm x (D) 165mm

(Ø) 7.95” x (D) 5.7”

(Ø) 202mm x (D) 117mm

(Ø) 7.95” x (D) 4.62”

(Ø) 202mm x (D) 144mm

(Ø) 7.95” x (D) 5.67”

(Ø) 202mm x (D) 227.5mm

(Ø) 7.95” x (D) 8.96”

(Ø) 251mm x (D) 103.5mm

(Ø) 9.88” x (D) 4.1”

(Ø) 251mm x (D) 205.1mm

{Ø) 9.88” x (D) 8.08”

CUT-OUT DIAMETER 178mm (7.01”) 178mm (7.01”) 178mm (7.01”) 178mm (7.01”) 222mm (8.74”) 222mm (8.74”)

WEIGHT 1.6kg (3.5lb) 1.3kg (2.9lb) 2.2kg (4.9lb) 2.2kg (4.9lb) 2.24kg (4.94lb) 3.0kg (6.6lb)

INCLUDED ACCESSORIES 2 tile support rails (for 2ft or 600mm tile

spans), cutout template, paint shield,

removable locking, multi-pin connector

2 tile support rails (for 2ft or 600mm tile

spans), cutout template, paint shield,