USER GUIDE Up Ceiling Loudspeaker Loudspeakers >
Up Ceiling Loudspeakers Loudspeakers Congratulations on your choice of Optimal Audio for your latest sound system installation. The Optimal Audio range of compatible audio zoners, amplifiers and loudspeakers are designed to work together simply and effectively. Our quick start guides will take you through the simple connection and set up procedure. USER GUIDE Introduction © 2022. Optimal Audio Group Ltd. (v1.
Up Ceiling Loudspeakers Loudspeakers Model Format Enclosure Single 3” driver Steel back can 8 Ohm or 70V – 100V line Rated power (AES) 20W 95Hz – 15kHz Up 4O Single 4” driver Open back 70V – 100V line only Rated power (AES) 10W 87Hz – 15kHz Up 4S Two-way passive coaxial 4” Shallow steel back can 8 Ohm or 70V – 100V line Rated power (AES) 15W 110Hz – 15kHz Up 4 Two-way passive coaxial 4” Steel back can 8 Ohm or 70V – 100V line Rated power (AES) 30W 100Hz – 18kHz Up 6O Two-way pass
Up Ceiling Loudspeakers Loudspeakers Fitting Up ceiling loudspeakers All models in the Up range are supplied with support rails designed to fit 600mm standard ceiling tiles. The following images clearly show the installation procedure step-by-step. A tile cutout template and a paint shield for each Up model is included. Be sure to cut your holes in the correct tiles before fixing the ceiling speakers! 1. 2. 3. 4.
Up Ceiling Loudspeakers Loudspeakers Connecting Up All Up loudspeakers are fitted with 4 pin Euroblock connectors. The terminals are wired as follows: Pin 1 : Negative In Pin 3 : Positive In Pin 2 : Negative link through Pin 4 : Positive link through To connect the cable to the loudspeaker terminals, follow this procedure.
Up Ceiling Loudspeakers Loudspeakers Matching Speakers and Amplifiers To get the best from your loudspeakers, it’s important to make sure the amplifier you are using is up to the job. Several factors have to be considered, and it’s worth clarifying what they mean and how they affect the performance of a loudspeaker.
Up Ceiling Loudspeakers Loudspeakers Each loudspeaker can be ‘tapped’ to receive a specific voltage, making individual control of the loudspeaker output possible. Take care to use the correct tap setting for the output voltage of the amplifier you are using. In the case of SmartAmps, which can drive either 70 or 100 volt lines, the 70 volt setting is recommended.
Up Ceiling Loudspeakers Loudspeakers Specifications Up 3 Up 4O Up 4S Up 4 Up 6O Up 6 TYPE Full range, passive, ceiling speaker Full range, passive, ceiling speaker Two-way, full range, passive, ceiling speaker Two-way, full range, passive, ceiling speaker Two-way, full range, passive, ceiling speaker Two-way, full range, passive, ceiling speaker FREQUENCY RESPONSE (with preset) 95Hz - 15kHz ± 3dB -10dB @68Hz 87Hz - 15kHz ± 3dB -10dB @60Hz 110Hz - 18kHz ± 3dB -10dB @85Hz 100Hz - 18kHz ± 3dB
Up Ceiling Loudspeakers Loudspeakers Important Safety Instructions WARNING! DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6.
Relax, It’s Optimal Audio. optimal-audio.co.uk Optimal Audio Group Ltd.
