User Guide
Table Of Contents
Mounting Cuboid 3, 3TX, 5 and 5TX in any
orientation is easy thanks to the universal bracket
that is supplied with the loudspeaker.
It is critical that the structure to which Cuboid is
to be mounted is suitable for taking the weight
of the loudspeaker/bracket assembly. It is highly
recommended that a secondary safety xing be
tted.
The wall bracket is xed to the mounting position
by 4 screws as shown.
The orientation of the loudspeaker xing plate can
be pre-set and tightened using the supplied 4mm
hex wrench. Use the supplied 3mm hex wrench to
x the loudspeaker to the bracket.
Once the wall mounting part is xed, attach the
loudspeaker part of the bracket to the mounting
points on the back of Cuboid 3, 3TX, 5 and 5TX.
Attach the loudspeaker and bracket assembly
to the wall mount and tighten in the desired
orientation.
Wall mounting Cuboid 3, 3TX, 5 and 5TX –Portrait or landscape
5/23
Cuboid
Loudspeakers
Loudspeakers
USER GUIDE
© 2022. Optimal Audio Group Ltd. (v2.2)
>
<
Introduction
Aiming/
coverage
Overview
Horizontal
coverage
Wall mount
Connecting up
Ceiling mount
Matching
speakers/amps
Grille removal
Accessories
Badge rotation
Specications
Coverage
Horn rotation
Safety info