User Guide

Table Of Contents

Cuboid 8, 10, 12 and 15 are tted with two standard NL4 type connectors.

These have two pairs of terminals. Cuboid uses only pins 1+ and 1-. These are

linked across the two connectors, providing a useful link to a second loudspeaker

of the same model. No more than two Cuboids should be connected to a single

amplier channel. 2+ and 2- are not connected and are not linked through. For

connection, we recommend using a exible cable with a minimum cross-sectional

area of 1.5mm²

Connecting Cuboid 8, 10, 12 and 15

Cuboid connector viewed from rear

Cuboid uses these terminals

When wiring loudspeaker cables be careful

to observe the correct polarity of the cable

and connector at both ends.

16/23

Cuboid

Loudspeakers

USER GUIDE

Introduction

Aiming/

coverage

Overview

Horizontal

coverage

Wall mount

Connecting up

Ceiling mount

Matching

speakers/amps

Grille removal

Accessories

Badge rotation

Specications

Coverage

Horn rotation

Safety info