User Guide

Table Of Contents

The U brackets A,B,C & D are specically designed for hanging Cuboid from a

ceiling in landscape mode. Fixing the U bracket is a simple process:

• Remove the centre M8 bolt from the top and bottom of Cuboid

• Place the U bracket over the loudspeaker and line up the holes with the centre

M8 bolt hole

• Use the supplied bolts to x the bracket to the loudspeaker

• When the angle is set, x with the supplied locking screw

The coverage specications are useful for informing where the loudspeakers

should be aimed. In any horn-loaded loudspeaker, the optimum output is the

centre axis of the horn where you have maximum level from the system. It

therefore follows that the horn axis should be aimed at the furthest point of the

audience.

Sound level however decreases by 6dB for every doubling of distance. This

means that 96dB at 5m from a loudspeaker will reduce to 90dB at 10m – a

signicant drop in energy.

Ceiling mounting using the U bracket Loudspeaker aiming

25 deg

IDEAL AIMING FOR A 50 DEGREE VERTICAL HORN

HORN AXIS AIMED AT FURTHEST POINT OF COVERAGE

-6dB AIMED AT NEAREST

POINT OF COVERAGE

-6dB REDUCED ENERGY

ON CEILING

9/16

Cuboid

Loudspeakers

USER GUIDE

Introduction

Overview

Wall mounting

Horn rotation

Ceiling

mounting

Connecting up

Matching

speakers and

amps

Safety

information