User Guide

Table Of Contents

When installing horn loaded loudspeakers, it’s worth taking a moment to

understand how the loudspeaker projects sound and how to get the best

coverage in your venue by careful aiming.

The above table lists the coverage angles of the high-frequency horns in the

Cuboid range. These gures are quoted using the centre axis of the horn as 0°

and measuring the angle off centre where the sound pressure level (SPL) drops

by 6dB. The results given reect horn symmetry, 90° = 45° horizontally off axis

both sides of centre.

These specications refer to the loudspeaker ex-factory. With the loudspeaker in

portrait, the horn is tted to deliver coverage as shown in the table above. If you

intend to mount your Cuboid in landscape mode (when suspending horizontally

from ceiling for instance), consider rotating the horn as shown in the following

images:

Speaker positioning and aiming

Cuboid Model Horizontal Vertical

Cuboid 8 90° 50°

Cuboid 10 90° 50°

Cuboid 12 80° 50°

Cuboid 15 80° 50°

7/16

Cuboid

Loudspeakers

USER GUIDE

Introduction

Overview

Wall mounting

Horn rotation

Ceiling

mounting

Connecting up

Matching

speakers and

amps

Safety

information