User Guide

Table Of Contents

All Cuboid loudspeakers are tted with two standard NL4 type connectors.

These have two pairs of terminals.

Cuboid uses only pins 1+ and 1-. These are linked across the two connectors,

providing a useful link to a second loudspeaker of the same model. No more than

two Cuboids should be connected to a single amplier channel.

2+ and 2- are not connected and are not linked through.

For connection, we recommend using a exible cable with a minimum cross-

sectional area of 1.5mm²

Connecting Up

Cuboid connector viewed from rear

Cuboid uses these terminals

When wiring loudspeaker cables be careful

to observe the correct polarity of the cable

and connector at both ends.

11/16

Cuboid

Loudspeakers

USER GUIDE

Introduction

Overview

Wall mounting

Horn rotation

Ceiling

mounting

Connecting up

Matching

speakers and

amps

Safety

information