ENGLISH USER’S MANUAL 11175-en-GB | 5J0062 | 04 © 2006 compact handheld 1D/2D code scanner
1 2 3 A B 4 C
INSTALLATION INSTRUCTIONS FIRST STEP: TURN POWER OFF ! • Exercise caution at all times when working with AC and DC-powered equipment. • Turn off all your equipment before installation. • It is strongly recommended to use Opticon cables and power supplies. NEXT STEPS: CONNECT INTERFACE • Find your interface type in the corresponding diagram • Connect the scanner to the computer in accordance with the diagram and corresponding Instructions. • Turn your computer equipment on.
1 9 1 6 3 4 2 7 5 7 3 1 6 7 3 2 4 8 6 7 5 2 ! B C D A o + 40 C E 0 C o F 5
1 DETAILED VIEW Depending on the supplied model and/or the configured options, the following options are applicable: 1. Reading window to read the codes. Never obstruct this window! 2. Trigger key to activate the scanner. 3. LED indicator 4. Buzzer/Beeper Typical LED indication: red: no code reading / no code acceptation / power is on green: successful code reading / battery full flashing LED: data transmission blue: Bluetooth connection / 802.15.4 communication 5.
3 X X X X X X
3 READING CODES Check the scanning engine Is the scanning engine on? Is a red light beam visible? If not, press the trigger key. For models without a trigger key check the cable connection. Approach the code • Point the reading window of the scanner in the direction of the code. • The code should fit from margin to margin in the light beam width. • Move the scanner close to the label. • Check the data at the connected computer device.
- The Netherlands: Hoofddorp - France: ISSY Les Moulineaux CEDEX - Germany: Dietzenbach - Italy: Castel Maggiore (BO) - Spain: Valencia - Sweden: Järfälla - United Kingdom: Luton, Bedfordshire - U.S.A.: Orangeburg - Japan: Warabi City - Taiwan: Taipei - P.R.China: Shanghai - Australia: Kariong www.opticon.
