PE-292 PE-292 V0 Electronic Shelf Label The PE-292 is an e-paper based electronic shelf label with a scrPEn size of 2.9”. It has a build-in NFC reader plus several 3color LEDs.
PE-292 V0 The information in this document is subject to change without notice. Document History Model Number: Revision: PE-292 V0 Original release date Date 21-12-2017 21-12-2017 2017 Copyright Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
PE-292 V0 Revision History Product Name : PE-292 Edition V0 Date 21-12-2017 Page - Section - Description of Changes Preliminary Version 3
PE-292 V0 Contents 1 Abstract............................................................................................................................6 2 Overview ..........................................................................................................................6 3 Physical Features............................................................................................................6 4 3.1 Dimensions ...................................................................
PE-292 V0 Table of Figures Figure 1: Dimensions............................................................................................................................... 6 Figure 2: Product Label ......................................................................................................................... 11 Figure 3: Product Label dimensions ...................................................................................................... 11 Figure 4: Shipment box label ...............
PE-292 V0 1 Abstract This manual provides specifications for the PE-292 RFID reader & Electronic Shelf Label (hereafter referred to as “ESL”). 2 Overview The PE-292 is an e-paper based Electronics Shelf Label with a 2.4GHz radio for data communication that also features an active RFID reader and 3-color LED’s, externally powered via a rail system.
PE-292 V0 3.2 Weight 47.8 g (including batteries) 4 Environmental Specifications Conditions Power Supply Voltage 4.1 Operating Temperature and Humidity Temperature: Humidity: 4.2 0 to 40° C 20 to 85% RH (Non Condensing) Storage Temperature and Humidity Temperature: Humidity: 4.3 -20 to 60° C 20 to 85% RH (Non Condensing) Humidity Operating Humidity Storage Humidity 4.4 4.5 5.
PE-292 V0 5 Controls Items CPU LCD Radio RFID Buzzer LED Specifications Remarks Type 8051 core 8-bit MCU Internal flash ROM 256KB Internal RAM 8 KB Clock frequency 32 MHz Active area W 66.90 x H 29.06 mm Number of dots W 296 x H 128 Black & White. Red is on request Dot pitch 112 Horizontal 112 Vertical Dots per Inch Modulation DSSS Frequency 2394 ~ 2507 MHz Baud rate 250 Kbits / second Frequency 13.
PE-292 V0 6 Electrical Specifications 6.1 Electrical Characteristics Parameter Min. Typ. Max. Unit Remarks Operating voltage 3.3 5 5.5 V LED and Buzzer perform less with lower operating voltages. 60 65 mA RFID reader active 4002 300 80 mA All LED’s (3 colors) and buzzer on All LED’s (3 colors) on, buzzer off Picture update, LED’s & buzzer off Standby current1 Max. operating current 1 The ESL is in standby mode almost the entire time, trying to read an RFID tag.
PE-292 V0 7.1.2 7.2 The medium access control layer The medium access control (MAC) layer enables the transmission of MAC frames through the use of the physical channel. Besides the data service, it offers a management interface and itself manages access to the physical channel. It also controls frame validation, guarantPEs time slots and handles node associations. Finally, it offers hook points for secure services.
PE-292 V0 8 Labeling 8.1 Product Label The product label is affixed to the ESL as shown below. Figure 2: Product Label Label material: Material: Base + laminate protection against wear. Base: PP film, thickness 80µm, backing with glue. Laminate: PET film, clear, thickness 25µm. RoHS compliant Label dimension: 36 x 19mm (w x h) Tolerance ± 0.1mm Corner radius 1mm Barcode area: The size of the barcode area (without the human readable part) is 2.6x27.9mm). The barcode shows the product serial number.
PE-292 V0 8.2 Shipment Box Labels The shipment box labels are meant to show the regulatory information on the shipment box as well as the quantity in the box. The labels are 150mm*95mm and are made from plain paper with adhesive backing.
PE-292 V0 9 Packaging Specifications 9.1 Individual Packaging Specification The ESL’s do not nPEd to be packed separately. To easily pack them, 20 pcs nPEd to be packed in a plastic molded tray: Figure 5: Individual packaging 9.2 Collective Packaging Specification Pack the tray with 20 PE-292’s in a plastic bag, fold the open end of the bag and fix it with a piece of tape.
PE-292 V0 Put 10 stacks, containing 200 ESL’s inside a box and stick the shipment box label on the indicated position. Use cardboard and a plastic bag betwPEn each layer of ESL’s as shown below. Figure 7: collective shipment packaging Note: The “RO” mark labelled on the package tray or package box guarantPEs that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC).
PE-292 V0 10 Regulatory Compliance 10.1 Product Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 IEC 60950-1:2005 (2nd Edition)+Am 1:2009+Am 2:2013 10.2 EMC EN55022: 2010 EN55024: 2010 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.
PE-292 V0 10.3 WPEE Waste Electrical and Electronics Equipment Directive, 2012/19/EU. The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
PE-292 V0 11 Safety Handle this product carefully. Do not deliberately subject it to any of the following. 11.1 Shock Do not throw or drop the ESL. Do not place heavy objects on the ESL. 11.2 Temperature Conditions Do not use the ESL at temperatures outside the specified range. Do not pour boiling water on the ESL. Do not throw the ESL into the fire. Do not leave the ESL on the dashboard of a car. 11.3 Foreign Materials Do not immerse the ESL in liquids. Do not subject the ESL to chemicals. 11.
PE-292 V0 12 Mechanical Drawing Figure 8: Mechanical drawing 18
