User Manual

OPN2001 User Parameters

PAGE 1
OPN2001 User Parameters
PAGE 2
Opticon OPN2001 User Parameters There are no barcode changeable parameters in the OPN2001; they are only changeable by host command. Buzzer Parameter Reject Redundant Barcode Low-Battery Indication Comments Disabling will allow same barcode to be stored consecutively. Mode 1 means that a code is allowed only if the previous code is not the same. Mode 2 means that a code is allowed only if none of the previous codes are the same. Determines how low battery condition will be handled.
PAGE 3
Opticon OPN2001 User Parameters UPCA Preamble UPCE Preamble Scratch Pad Convert UPCE to UPCA Convert EAN8 to EAN13 Send UPCA Check Digit A 32 byte storage area unused by the OPN2001. For customer use. Add zero’s but do not change the code type Send UPCE Check Digit Transmit Code 39 Check Digit Code 39 Check Digit UPC/EAN Addon redundancy EAN 128 # of times to decode UPC/EAN barcode without addon.