OPL 9712 Barcode Data Collector Specifications Manual
Opticon OPL 9712 Specifications Manual All information subject to change without notice. Document History Model Number: OPL 9712 Specification Number: SS06071 Edition: 1 Original Spec Number: SS06050 Date: 2007-02-05 Copyright 2007 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
Opticon OPL 9712 Specifications Manual Contents 1. Abstract ....................................................................................................................................5 2. Overview...................................................................................................................................5 3. Physical Features ....................................................................................................................6 3.1. Dimensions ..................
Opticon OPL 9712 Specifications Manual 14.2. Vibration Strength ..........................................................................................................23 14.3. Dust and Drip Proof........................................................................................................23 15. Reliability................................................................................................................................23 16. Regulatory Compliance ..................................
Opticon OPL 9712 Specifications Manual 1. Abstract This manual provides specifications for the OPL 9712 barcode data collector (hereafter referred to as “data collector”). 2. Overview This scanner uses laser technology. To start a scan, press the trigger switch. Do not allow the scanner to directly touch the surface of a barcode when scanning. Operating the scanner via a trigger switch enables low-power operation and longer battery life. Supported symbologies: Linear (1D) 2D JAN/UPC/EAN (WPC), incl.
Opticon OPL 9712 Specifications Manual Applications can be developed for this product using the Software Development Kit (SDK). Software can be developed in the C programming language. These development tools are available as accessories. Figure 1: Reading a barcode. 3. Physical Features 3.1. Dimensions W 129 mm x D 44 mm x H 22.3 mm 3.2. Weight 105 grams (with lithium-ion batteries installed).
Opticon OPL 9712 Specifications Manual 4. Environmental Specifications 4.1. Operating Temperature and Humidity Temperature: 0 to 40° C Humidity: 20 to 85% 4.2. Storage Temperature and Humidity Temperature: -20 to +60° C Humidity: 20 to 90% 4.3.
Opticon OPL 9712 Specifications Manual 5. Electrical Specifications Item Specifications Remarks Main battery 600 mAh lithium-ion battery Main battery life Rechargeable: 300 times Backup battery 3.
Opticon OPL 9712 Specifications Manual 8. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Ambient temperature and humidity Room temperature (5–35° C) and room humidity (45% RH–85% RH) Ambient light 500 to 900 lx Background Barcode = black Space = white Margin = white Background of label = black 8.1. Print Contrast Signal (PCS) 0.45 or higher (over 70% of reflectivity of space and quiet zone).
Opticon OPL 9712 Specifications Manual The scanning range follows a rectilinear path and expands in the shape of an arc while centering (focusing) on a distant virtual reference point. PCS Resolution (mm) Decode Depth (mm) 0.9 1.0 60–300 0.5 35–210 0.25 35–120 0.15 35–70 Resolution Symbology PCS Digit 1.0 mm Code 39 0.9 1 0.5 mm Code 39 0.9 3 0.25 mm Code 39 0.9 8 0.15 mm Code 39 0.
Opticon OPL 9712 Specifications Manual 8.3. Pitch, Skew, and Tilt 8.3.1. Pitch Angle Scanning performance is guaranteed at α±25°.
Opticon OPL 9712 Specifications Manual 8.3.2. Skew Angle and Dead Zone Skew angle: β = ±50° (Excluding dead zone) Dead zone: β = ±8° (There are some areas in which decoding fails due to specular reflection) (Depth of field: Within 90 mm from the minimum scannable distance).
Opticon OPL 9712 Specifications Manual γ=20 ° γ=20 ° 8.3.3. Tilt Angle Scanning performance is guaranteed when γ = ±20° Figure 6: Tilt angle Conditions Barcode Sample: OPTOELECTRONICS Test Sample Distance: 90 mm from the edge of the data collector Label: Pitch, Skew Angle PCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code 39, Quiet Zone = 10 mm, N/W Ratio = 1:2.5 Dead Zone, Tilt Angle PCS = 0.9, Resolution = 0.
Opticon OPL 9712 Specifications Manual 8.4. Curvature With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R≥15 mm. With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R≥20 mm. Figure 7: Curvature Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS = 0.9, Resolution = 0.26 mm, Quiet Zone = 10 mm Distance: 90 mm from the edge of the data collector Angle: Skew Angle β = +15° The scanning range will vary according to the depth of field.
Opticon OPL 9712 Specifications Manual 9. Interface Specifications 9.1. Bluetooth Specifications Bluetooth® is a registered trademark owned by its proprietor and used by OPTOELECTRONICS Co., Ltd. under license. Feature Description Version 1) Supported protocol stack 2.
Opticon OPL 9712 Specifications Manual 9.2. Frequency Bluetooth devices use the 2.4 GHz frequency band. Scientific, medical, and industrial devices, including microwaves, wireless security (camera) systems and WLAN use the same frequency band as this scanner.
Opticon OPL 9712 Specifications Manual 10. Default Settings 10.1.
Opticon OPL 9712 Specifications Manual Read Transmit Code Length Transmit CD Calculate CD Set Prefix Set Suffix RSS-14 X X — CR RSS-limited X X — CR RSS-expanded X X — CR S-Code X X — CR Telepen X X — CR Trioptic X — — — CR Symbology Other Not transmit ST/SP Notes: • In the “Reading” column, “” means “Enable reading” and “X” means “Disable reading.
Opticon OPL 9712 Specifications Manual 11. Serial Number The serial number shown on the right is written on silver matte with black paper affixed to the backside of the OPL 9712.
Opticon OPL 9712 Specifications Manual 12. FCC Labels This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Opticon OPL 9712 Specifications Manual 13. Packaging Specifications 13.1. Individual Packaging Specification Place the OPL 9712 in a protection bag E, and pack it in the provided box. Then place the accessories into the box. Accessories: • 1 lithium-ion battery • 1 hand strap Close the box and affix a label to the side of the box.
Opticon OPL 9712 Specifications Manual 13.2. Labeling Figure 11: Labels When packing 50 pre-packaged data collectors, select a box size equal to 560 mm (W) by 490 mm (D) by 195 mm (H). Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC).
Opticon OPL 9712 Specifications Manual 14. Durability 14.1. Shock There was no damage to the data collector structure or data collector operation after dropping the data collector from a height of 1.5 meters onto a concrete floor. Each side of the data collector impacted the floor three times. Figure 12: Shock test 14.2. Vibration Strength No malfunction occurred after the following vibration test. Vibration test: Increase the frequency of the vibration from 12Hz to 100Hz with accelerated velocity 19.
Opticon OPL 9712 Specifications Manual 16. Regulatory Compliance 16.1.Laser Safety The data collector emits laser beams. • JIS C6802: 2005: Laser class 1 • IEC60825-1: Laser class 1 • CDRH Laser class I. Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50 dated June 24, 2007. Class 1 laser devices are not considered to be hazardous when used for their intended purpose. Avoid staring into the laser beam. 16.2.
Opticon OPL 9712 Specifications Manual 16.4. R&TTE This scanner conforms to the following standards of the Radio and Telecommunications Terminal Equipment (R&TTE) directive from the EU. EN300 328 EN301 489-1 IEC60950-1 EN60950-1 The scanner qualifies as radio equipment for low-power radio stations (2.4 GHz band advanced data communication systems) as specified in the Radio Law 38-24-1. The scanner has obtained the Certification for Construction Design of Specified Radio Equipment.
Opticon OPL 9712 Specifications Manual 17. Safety Handle this product carefully. Do not deliberately subject it to any of the following. 17.1. Shock • Do not throw or drop the data collector. • Do not place heavy objects on the cables. 17.2. Temperature Conditions • Do not use the data collector at temperatures outside the specified range. • Do not pour boiling water on the data collector. • Do not throw the data collector into the fire. • Do not forcibly bend the cables at low temperatures.
Opticon OPL 9712 Specifications Manual 18. Mechanical Drawing 8 TUV 0 - 7 PQRS .*... 20 .4 ENT 3DEF 6MNO 2 ABC 5 JKL 4GH I CLR BS 1 Sh i f t 20 22 .
