User Manual Instruction Manual

CRD
-
CRD
-
CRD
-
Specification
Battery Charging Time
1. Plug the AC adapter into the power jack on the back of the cradle.
2. Plug the other end of the AC adapter into an electrical outlet.
3. Dock your PPC phone into the PDA holder of the cradle. Make sure that their
connection pins come into contact with each other.
4. The power indicator on the cradle lights in green if there is an electric current
flowing through the cradle successfully.
5. The power LED on your PPC phone lights in orange during charging.
6. When charging is completed, pull your PPC phone up to detach it from the
cradle.
Charging the Battery
You can fast-charge the battery with the cradle.
1. Plug the AC adapter into the power jack on the back of the cradle.
2. Plug the other end of the AC adapter into an electrical outlet.
3. Insert the battery into the second battery slot of the cradle. Make sure that
the battery is oriented correctly. (If you are charging a high capacity battery,
remove the removable plastic plate).
4. The second battery status indicator displays the charging status. Remove the
battery when charging is completed.
Synchronizing with Your PC
1. Dock your PPC phone on the PDA holder of the cradle. Make sure that their
connection pins come into contact with each other.
2. Plug the USB cable into the USB port of the cradle.
3. Plug the other end of the USB cable into an available USB port on your PC.
4. The USB indicator on the cradle lights in green if there is an electrical current
flowing through the cradle successfully. You can then start charging or/and
synchronizing your PPC phone.
5. When the synchronization process completes, remove your PPC phone from
the cradle.
Charging Fully charged No battery Error
Solid red light Solid green light Off Blinking red light
You have to install ActiveSync on your PC before you can begin
synchronizing.
You can not charge the battery in the second battery slot with the USB
cable, use the AC adapter only.
To charge and synchronize your PPC phone at the same time, connect the
AC adapter to the cradle first, and then connect the USB cable.
Overall dimension 76.1mm×88.5mm×89.3mm (W/H/L)
Weight 116±2 g
AC adapter 5V 3.6A
Operating temperature 5˚C~40˚C
Operating humidity 20%~80%RH
Storage temperature -20˚C~60˚C
Storage humidity 20%~90%RH
Charge with Full-charge time
PDA holder Standard battery: 4 hours
High capacity battery: 8 hours
Second battery slot Standard battery: 2.5 hours
High capacity battery: 5 hours
6061B0248601