User's Manual
Table Of Contents
- 1 Abstract
- 2 Overview
- 3 Basic Specifications
- 4 Electrical Specifications
- 5 Mechanical
- 6 Interface Specifications
- 7 Optical Specifications
- 8 Environmental Specifications
- 9 Regulatory Compliance
- 10 Labeling
- 11 Packaging Specifications
- 12 Safety precautions
PX-36
V-1.0
14
7.2 Aiming Pattern
The aiming pattern is used for the following purposes:
1. Light source to indicate the appropriate reading range.
2. Light source for auto trigger operation.
The specifications for the aiming pattern are as follows:
・ The optical axis of the field of view and the center of the aiming pattern coincide at a distance of
L=65±20 mm from the front edge of the scanner.
・ The width of the aiming pattern is 80%±10% of the width of the field of view at a distance of
L=65mm.
Figure 4: Aiming pattern
7.3 Imaging Range
L: Distance from the front edge of scanner
[mm] 40 60 80 100 120 140
H: Horizontal imaging range
[mm] 66 82 97 111 125 136
V: Vertical imaging range
[mm] 42 52 62 72 82 93
All values have an accuracy of ±5%.