User Manual
Table Of Contents
- 1. Abstract
- 2. Overview
- 3. Physical Features
- 4. Environmental Specifications
- 5. Electrical Specifications
- 6. Interface Specifications
- 7. Cables and Connectors
- 8. Labels
- 9. Packaging Specifications
- 10. Regulatory Compliance
- 11. Safety recommendations
- 12. Mechanical Drawings
Opticon
CRD9823-RU
Specifications Manual
9
6.2.2. Baud Rate Configured Using Software
To allow configuration using software on the host computer, set SW4 to ON. The
other DIP switches are not used when SW4 is ON.
CTS
Line
DSR
Line
Baud Rate Remarks
Edge 0 pulse 115.2 kbps Reset Pulse Count
1 pulse 57.6 kbps
2 pulse 38.4 kbps
3 pulse 19.2 kbps
4 pulse 9600 bps
5 pulse 4800 bps
6 pulse 2400 bps
7 pulse 1200 bps
Figure 2: Signal timing when software is configured