User Manual
Table Of Contents
- 1. Abstract
- 2. Overview
- 3. Physical Features
- 4. Environmental Specifications
- 5. Electrical Specifications
- 6. Interface Specifications
- 7. Cables and Connectors
- 8. Labels
- 9. Packaging Specifications
- 10. Regulatory Compliance
- 11. Safety recommendations
- 12. Mechanical Drawings
Opticon
CRD9823-RU
Specifications Manual
7
6. Interface Specifications
6.1. External Interface Connector and Pin Assignment
6.1.1. DC Power Supply Connector (EIAJ Type 3)
Pin Signal Name Notes
Inward +6 V Power supply +6 V
Outward GND Ground
6.1.2. Connector for USB on PC Side (USB Type B)
Pin Signal Name I/O Notes
1 VBUS P USB bus power supply
2 D- I/O Data -
3 D+ I/O Data +
4 GND P Ground
6.1.3. Connector for RS-232C on PC Side (Ten-electrode modular jack)
Pin Signal Name I/O Notes
1 GND P Ground
2 CTS I For baud rate software control
3 TXD O Transmit data to PC
4 RXD I Receive data from PC
5 NC - Not connected
6 GND P Ground
7 NC - Not connected
8 DSR I For baud rate software control
9 NC - Not connected
10 GND P Ground