User's Manual

OPTICON
User's manual
PHL-7000 series
3
-
5
chapter 3 and lookup the serial command sequence, and enter this commands sequence in
Bar Code Settings tool’s “Advanced” TAB.
The Opticon Universal Menu Book can be downloaded from www.opticon.com.
Note : support for symbologies may be dependent of the bar code reader firmware.
Figure 3-2 Code configure Tab
Field name Description
UPC Enable UPC A and UPC-E (default)
UPC+2 Enable UPC-A ADDON 2 and UPC-E ADDON 2
UPC+5 Enable UPC-A ADDON 5 and UPC-E ADDON 5
EAN Enable EAN-13 and EAN-8 (default)
EAN+2 Enable EAN-13 ADDON 2 and EAN-8 ADDON 2
EAN+5 Enable EAN-13 ADDON 5 and EAN-8 ADDON 5
Code 39 Enable Code 39 (default)
Tri-optic Enable Tri-optic (default)
Codabar Enable Codabar (default)
Industrial 2of5 Enable Industrial 2of5 (default)
Interleaved 2of5 Enable Interleaved 2of5 (default)
S Code Enable S Code (default)
Matrix 2of5 Enable Matrix 2of5
Chinese Post Matrix 2of5 Enable Chinese Post Matrix 2of5