User Manual Part 5

OPTICON
User's manual
PHL-7000 series
3
-
12
Thereafter the display will look like :
Figure 3-2 Prefix : Selected character ‘U’ for UPC-A..
Repeat these steps for the characters ‘P’, ‘C’ and ‘A’.
Thereafter the display will look like :
Figure 3-2 Prefix : Selected characters ‘UPCA’ for UPC-A..
If the bar code reader reads an UPCA label with data ‘071589812309’, it will be send to the
application as : ‘UPCA071589812309<CR>’ where <CR> is the default suffix ASCII character
<CR>.