Electronic shelf label EE201 The EE201 is an e-paper based electronic shelf label with a screen size of 2” and with 802.15.4 based wireless communication.
EE201 Specifications Manual All information subject to change without notice. Document History Model Number: EE201 Specification Number: Edition: 1.2 Original Spec Number: Date: August 2, 2013 Copyright 2012 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
EE201 Specifications manual Contents 1. Abstract ..................................................................................................................................... 5 2. Overview ................................................................................................................................... 5 3. Physical Features ..................................................................................................................... 6 3.1. Dimensions .......................
EE201 Specifications manual 12.5. Other ............................................................................................................................... 14 13. Mechanical Drawing ............................................................................................................... 15 Table of Figures Figure 1: Dimensions .................................................................................................................. 6 Figure 2: product label ......................
EE201 Specifications manual 1. Abstract This manual provides specifications for the EE201 electronic shelf label (hereafter referred to as “ESL”). 2. Overview The EE201 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses Direct Sequence Spread Spectrum RF technology that allows for an ultra-low power consumption combined with a reduced sensitivity to background noise. That means less interference by other radios that operate in the 2.4GHz band.
EE201 Specifications manual 3. Physical Features 3.1. Dimensions W 65.7 x H 34.9 x D 13.7 mm Figure 1: Dimensions 3.2. Weight 40 g (including battery) 4. Environmental Specifications 4.1. Operating Temperature and Humidity Temperature: 10 to 50° C Humidity: 20% to 85% RH 4.2. Storage Temperature and Humidity Temperature: -20 to 60° C Humidity: 20% to 85% RH 4.3.
EE201 Specifications manual 5. Controls Items Specifications Remarks Type 8051 core 8-bit MCU Internal flash ROM 96KB Internal RAM 6 KB Clock frequency 32 MHz Active area W 45.8 x H 22.0 mm Number of dots W 200 x H 96 Dot pitch 111 Horizontal 111 Vertical Modulation DSSS Frequency 2394 ~ 2507 MHz Baud rate 250 Kbits / second CPU LCD Radio Dots per Inch Globally approved 2.4GHz band. 6. Electrical Specifications 6.1. Electrical Characteristics Conditions: Operating voltage 3.
EE201 Specifications manual 7. Radio Specifications Parameter Min Receiver sensitivity Nominal output power Frequency -3 Typ Max Unit Remarks -97 -89 dBm Over the entire temp. and operating voltage range 4.5 7 dBm 2507 MHz Over the entire temp. and operating voltage range dB Signal strength indication that can be reported to the base station 2394 Transfer rate 250Kbit/s RSSI range 100 7.1. Protocol Modified 802.15.4 (Physical layer and Media Access Control layer). 7.1.1.
EE201 Specifications manual 8. Labeling 8.1. Product label The product label is affixed to the ESL as shown below. Figure 2: product label The barcode shows the product serial number. This is a ‘B’ is followed by 10 hexadecimal digits. This serial number is the same as the MAC address in the ESL-label, with the first 6 digits replaced by a ‘B’. Material: Base + laminate protection against wear. Base: PP film, thickness 80µm, backing with glue. Laminate: PET film, clear, thickness 25µm.
EE201 Specifications manual 8.2. Shipment box labels The shipment box labels are made from plain paper and are meant to show the regulatory information on the shipment box as well as the quantity in the box. The label design is shown below. The labels are 150mm*95mm and are made from plain paper with adhesive backing. Figure 4: shipment box labels Label A shows the PO number, the Quantity in the box and the serial number range, all encoded in barcodes as shown.
EE201 Specifications manual 9. Accessories To mount the ESL onto a rail in a shop, the EE201 can be fitted with a rail attachment system made by HL-display system. This rail attachment accessory can click into a standard rail from HL-Display and rails are available for nearly all brands of shelves. Please consult a dealer for details on their offering. The shelftaker that fits the EE201 is available from Opticon as an accessory. Figure 5: HL hinged shelftaker for data strips. 10.
EE201 Specifications manual 10.2. Collective Packaging Specification Pack the tray with 30 EE201’s in a plastic bag, fold the open end of the bag and fix it with a piece of tape. Figure 7: Collective packaging 1 Put 10 stacks, containing 300 ESL’s inside a box and stick the shipment box label on the indicated position.
EE201 Specifications manual 11. Regulatory Compliance 11.1. Product Safety EN60950-1:2001 IEC60950-1:2001 11.2. EMC EN55022 EN55024 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
EE201 Specifications manual 12. Safety Handle this product carefully. Do not deliberately subject it to any of the following. 12.1. Shock Do not throw or drop the ESL. Do not place heavy objects on the ESL. 12.2. Temperature Conditions Do not use the ESL at temperatures outside the specified range. Do not pour boiling water on the ESL. Do not throw the ESL into the fire. Do not leave the ESL on the dashboard of a car. 12.3. Foreign Materials Do not immerse the ESL in liquids.
EE201 Specifications manual 13.
