User Manual

Opticon
EE200
Specifications Manual
8. Labeling
8.1. Product label
The product label is affixed to the ESL as shown below.
There are two barcodes on the label: The serial number on the top and the device’s MAC
address below. The serial number barcode simply shows the 8-digit serial number that
allows for a 100 million range of numbers.
The MAC address barcode is shown below the serial number code; the MAC’s factory code
is not shown to save some space. Instead it is replaced by a character that defines the
factory code. For now only the ‘A’ is defined and stands for “00124B”. Future versions might
get another character.
The ‘A’ is followed by 10 hexadecimal digits. The complete MAC address on the label
should match the address that is defined by the radio chip manufacturer so during
production of the ESL, the MAC address has to be obtained and then printed on the label.
Barcode symbology is code 39.
Material: Base + laminate protection against wear.
Base: PP film, thickness 80µm, backing with glue.
Laminate: PET film, clear, thickness 50µm.
The dimensions of the product label are as follows:
Figure 2: product label
Figure 3: product label dimensions