User's Manual

Opticon user's manual
USER’S MANUAL PHL2700 TERMINAL / IRU2700 CRADLE
23
Apart from the terminal, additional items
might be ordered.
Article Code
Terminal
PHL 2700-80 (8MB) A73800R0040
Battery pack for terminal
Rechargeable Battery Pack O2540000020
Dry Cell Battery Pack Assy O2510000030
(assy = case holder + penlite batteries)
Battery Case Holder Q2510000040
Penlite Batteries PBA30000010
Cable for terminal
RS232 cable DB 9 female O2500000050
Protective bags for terminal
Leather bag O2510000055
Leather bag clip O2510000060
Software development tools
Microtec
ANSI-C cross compiler O8010000010
C-library for
handheld terminals D4030000020
Application Generator
Potstar Limited D6010000010
Application Generator
Potstar Professional D6020000010
USER’S MANUAL PHL2700 TERMINAL / IRU2700 CRADLE
22
PRODUCT
ORDERING
INFORMATION
3
8
Apart from the cradle, additional items
might be ordered.
Article Code
Cradle
IRU2700-S O2540000015
Power supply for cradle
9V DC adaptor A50200N0020
Cables for cradle
RS232 cable DB 9 female O2520000020
Adapter
DB25 female/DB9 male P10AT000040
RS485 cable O2520000050
Terminal does not respond to key presses,
while the display stays on.
Message “Application halted” or
“No application installed” is shown.
There is no user’s application for PHL2700
loaded in the terminal. Contact your
supplier.
For example pressing the shift key does
not toggle the shift indicator.
There is a flaw in the application program.
Disconnect the battery pack, and place it
then back in.
The terminal will be in off-state.
Activate the system menu and restart the
application, or download new application.
If problems appears continously contact
the supplier of the user’s application.
Laser stays off, when pressing the
triggerkey.
Power is off.
The triggerkey is no powerkey. Press the
powerkey to get power.
If the terminal is not used the scanner will
switch off all functions.
Press the powerkey to reactivate.
Laser temperature has become too high.
The laser is switched off automatically,
when thelaser temperature becomes
above 50
o
C. Wait until the temperature
has dropped.
?
?
?
?
Terminal gets no power, when pressing the
powerkey.
The main battery is exhausted.
Replace the battery pack, or charge the
terminal in the cradle.
Terminal does still not operate and needs a
service
Send the terminal to your supplier for service,
paying attention to the limited warranty.
?
7.3 TERMINAL PROBLEMS