Opti Fitness Upper Body Door Gym Assembly & User Instruction – Please keep for future reference 618 / 0223 Important – Please read this instruction manual fully before assembly or using These instructions contain important information which will help you get the best from your equipment and ensure safe and correct assembly, use and maintenance.
Warning Warning & Cautions 1. Consult physician before any exercise. 2. Please make sure the bolts & Screw are tightened and in working condition before you use this product. Inspect the unit is installed securely, and use according the guide below. 3. Free area shall be not less than 0.6m greater than the training area in the directions from which the equipment is accessed. The free area must also include the area for emergency dismount.
1 Warning Assembly Tool required for assembly of this equipment: one screw driver and one adjustable wrench. (Customer self prepared) Total mass of the product: 1.95KGS This product is suitable for the door inner frame of 70cm-80cm, and depth of 11cm–16cm.
Attention! Make sure concave side of the holes on two Slide cross bars (1) facing to the two Curved bars (4).
2 Notice:
3 D Door Frame Installation Fig. 1: Position the Stop frame so that it rests on the top of the door frame/molding.
Exercise Guide
4 Ex Exercise Guide 2. Push-Ups 3. Dips 4.
3 5 Explode Parts Diagram Key no Description QTY Key no Description QTY 1 Slide cross bar 2 8 Ø6mm Spring clip 2 2 Middle cross bar 1 9 20×40mm End Cap 2 3 Stop Rail 1 10 Ф25mm End Cap 4 4 Curved bar 2 11 Ф22×Ф32×250mm Foam roll 2
Exploded Part List 6 Product Guarantee This product is guaranteed against manufacturing defects from a period of
YEAR
