User's Instructions

Attach 2XBackrest Pad Support(3) to the Main Base Frame(1) as the diagram shows , Align the hole

and secure with 1xM10X150mm Allen Bolt(14),2xØ10mm Washers (20), and 1XM10 Aircraft nut(22).

Attach the Backrest Pad Incline Support(4) between the 2XBakrest Pad Support(3) and Align the hole

and secure with 1xM10X150mm Allen Bolt(14),2xØ10mm Washers (20), 1XM10 Aircraft nut(22).

Do not fully tighten the bolt and nut, make sure that they can swivel freely.

Step 3

Assembly instructions