User Manual

ManualsBrandsOPTI-UPS ManualsPower suppliersPS7500DL

www.opti-ups.com

USER MANUAL

PS-D Line interactive UPS

PS650D / PS1000D / PS1500D / PS2000D

PS1000D-RM / PS1500D-RM

PS1000D-RT / PS1500D-RT / PS2000D-RT

PS3000D-RT / PS5000D-RT / PS7500D-RT / PS10000D-RT

PS3000DL / PS5000DL / PS7500DL

Uninterruptible Power Supply

CONTENTS

1. INTRODUCTION .............................................……........ 2

2. SAFTY INSTRUCTION...................……...…………….... 3

3. SYSTEM DESCRIPTION..........................……......…..... 7

4. OUTLINE DESCRIPTION..............................……......... 9

5. CABLE CONNECTION...................……...……………..... 22

6. OPERATION ................................................……........... 23

7. TROUBLE SHOOTING GUIDE.......................…….....… 28

8. OPERATION MODES OF THE UPS ..............……........ 30

9. COMPUTER INTERFACE ...........................……........... 32

10. SPECIFICATIONS…………………........…………..…..... 33

Summary of content (19 pages)

PAGE 1
Uninterruptible Power Supply www.opti-ups.com USER MANUAL PS-D Line interactive UPS PS650D / PS1000D / PS1500D / PS2000D CONTENTS 1. INTRODUCTION .............................................……........ 2 2. SAFTY INSTRUCTION...................……...…………….... 3 3. SYSTEM DESCRIPTION..........................……......…..... 7 4. OUTLINE DESCRIPTION..............................……......... 9 5. CABLE CONNECTION...................……...……………..... 22 6. OPERATION ........................................
PAGE 2
1. INTRODUCTION 1.3 Important Notices To be sure that the UPS will be operated correctly, the following items should be 1.1 General Description The continuity of electrical power is an essential requirement for critical load operations. The Uninterruptible Power System (UPS) is designed to meet the user‘s need of present computer, server and the equipment of office automation that make the UPS more compact and less noisy.
PAGE 3
2.2 Positioning 2.4 Operation 1. Do not put the UPS on rugged or declined surface. 1. Do not disconnect the mains cable on the UPS system or the building wiring 2. Do not install the UPS system near water or in damp environments. socket outlet during operations since this would cancel the protective earthing of 3. Do not install the UPS system where it would be exposed to direct sunlight or the UPS system and of all connected loads. near heat. 2.
PAGE 4
3. Batteries may cause electric shock and have a high short-circuit current. Please take the precautionary measures specified below and any other measures 3. SYSTEM DESCRIPTION 3.1 Front Panel Description for LCD Model necessary when working with batteries: - remove wristwatches, rings and other metal objects - use only tools with insulated grips and handles. 4. When changing batteries, install the same number and same type of batteries. 5. Do not attempt to dispose of batteries by burning them.
PAGE 5
4. Enter-Key: It is pressed with the Down-key to turn on the UPS, with the Up-key to turn off the UPS. Beside, it is pressed to confirm and enter the item selected. 4. OUTLINE DESCRIPTION 4.1 Case Outline 5. Fault LED (red): To indicate the UPS is in fault condition because of inverter PS650D shutdown or over-temperature. 6. Warning LED (yellow): To indicate the UPS is in the status of overload, bypass and battery back-up. 7. Normal LED (green): To indicate the UPS is operating normally. 8.
PAGE 6
PS1000D / PS1500D / PS2000D PS1000D-RT / PS1500D-RT / PS2000D-RT (2U) 10 11
PAGE 7
PS3000D-RT / PS3000DL Rack & Tower Convertible Unit (3U) 12 PS5000D-RT Rack & Tower Convertible Unit (3U) 13
PAGE 8
PS7500D-RT / PS10000D-RT / PS5000DL / PS7500DL Rack & Tower 4.2 Back View Description Convertible Unit (3U) PS650D 4. Output Socket (NEMA 5-15R 1. USB Interface Port 14 or IEC320) 2. Remote Control (optional) 5. Breaker 3. RJ11 Surge Protection (optional) 6.
PAGE 9
PS1000D / PS1500D / PS2000D PS1000D-RM / PS1500D-RM (1U) 1. RS-232 Interface Port 5. Output Socket 2. Intelligent Slot (SNMP, optional) 6. External Battery Socket ( L ) 3. RJ11 Surge Protection 7. Breaker 4. Remote Control 8. Input Socket 16 4. Output Socket (NEMA 5-15R or 1. RS-232 Interface Port IEC320) 2. Intelligent Slot (SNMP, optional) 5. Breaker 3. Remote Control (optional) 6.
PAGE 10
PS1000D-RT / PS1500D-RT / PS2000D-RT (2U) PS3000D-RT / PS3000DL Convertible Unit (3U) 1. RS-232 Interface Port 6. Fan 1. RS-232 Interface Port 6. Fan 2. Intelligent Slot (SNMP, optional) 7. External Battery Socket ( L ) 2. Intelligent Slot (SNMP, optional) 7. External Battery Socket ( L ) 3. RJ11 Surge Protection 8. Breaker 3. RJ11 Surge Protection 8. Breaker 4. Remote Control (optional) 9. Input Socket 4. Remote Control (optional) 9. Input Socket 5.
PAGE 11
PS5000D-RT Convertible Unit (3U) PS5000DL / PS7500D-RT / PS7500DL / PS10000D-RT Convertible Unit (3U) 1. RS-232 Interface Port 6. Fan 1. RS-232 Interface Port 6. Fan 2. Intelligent Slot (SNMP, optional) 7. External Battery Socket ( L ) 2. Intelligent Slot (SNMP, optional) 7. External Battery Socket ( L ) 3. RJ11 Surge Protection 8. Breaker 3. RJ11 Surge Protection 8. Breaker 4. Remote Control (optional) 9.Terminal Block 4. Remote Control (optional) 9.Terminal Block 5.
PAGE 12
6. OPERATION 5. CABLE CONNECTION 6.1 Check Prior to Start Up 5.1 Inspection 1. The system may be installed and wired only by qualified electricians in accordance with applicable safety regulations. 2. When installing the electrical wiring, please note the nominal amperage of your 1. Ensure the UPS is in a suitable positioning. 2. Check input cord is secured. 3. Make sure the load is disconnected or in the “OFF” position. 4. Check if input voltage meets the UPS rating required. incoming feeder. 3.
PAGE 13
2. By pressing the Enter- key and the Down-key simultaneously for 3 1．Rated Spec Menu 2．Status Menu seconds until the buzzer beeps twice, the UPS will start up and Normal LED lights up to indicate the power is from its inverter to the load. 3.
PAGE 14
9.Output Voltage/Frequency Set Menu 5．Battery Status Menu A. In this screen, press on/off Control Key to enter the following steps for output voltage or frequency setting. 6．V Output Power Menu 7．Temperature Menu B. The cursor (→) will pop up to indicate the output voltage or frequency newly selected. C.
PAGE 15
7.TROUBLE SHOOTING GUIDE 7.1 For LCD Model No. UPS STATUS POSSIBLE CAUSE ACTION The following guideline may be helpful for basic problem solving. No. UPS STATUS 1. Charger PCB is damaged. 1. Replace the charger PCB. 1 AC utility power is normal. UPS is running normally, but fault LED lits up. Buzzer beeps continuously. 2. Fan is damaged. 2. Replace the fan. 3. Unknown 3. Restart UPS AC utility power is normal but UPS is overloaded. Warning LED lits up and buzzer beeps per second.
PAGE 16
8. OPERATION MODES OF THE UPS 8.3 AC Utility Failure (Battery Mode) The AC output comes from battery, passing through DC/AC inverter and static 8.1 UPS System Block Diagram switch within the battery backup time. 8.2 Normal Operation There are two main loops when AC utility is normal: the AC loop and the battery charging loop. The AC output power comes from AC utility input and passes through static switch to support power to load.
PAGE 17
10. SPECIFICATION 9. COMPUTER INTERFACE 9.1 communication interface The communication interface (DB9 port) on the back of the UPS may be connected to a host computer. The port provides communication of RS-232 for monitoring software (like RUPSII or UPSilon 2000 of Megatec Company) The UPS communicates with the computer by sending out RS-232 data streams to one of the serial ports. By this method the user is able to monitor the following parameters.
PAGE 18
34 35
PAGE 19
www.opti-ups.