INSTALLATION GUIDE

2
Set up for pairing
IVPC-DS
Loosen the lock screw.
1
2
Slide the
main unit.
Pull off the main unit.
Remove the
rubber bushing.
Remove the front cover.
Push the power on/off button.
Confirm LED is flashing blue & white.
This is the pairing mode.
(Hold the factory reset button if not in
the pairing mode.)
1
Replace the
rubber bushing.
Replace the front cover. Push the front cover to secure.
IVPC-MS
Plug into an AC outlet.
Press the button to turn on.
Confirm that the LED turns on.
Use the stand for
convenience.
The display shows the
startup screen.
1
1
2
2
1
2
4 5
3
6
1 2 3
- 3 -
Search “OPTEX Vision”
in the store.
<<
To use the system with a device running the OPTEX Vision App. (option)
>>
Download OPTEX Vision
OPTEX Vision
Visit either “App store”
or “Google play” .
Find “OPTEX Vision”
to download it.
1 2 3
Insert a flat driver bit to pry open.
If having trouble with the cover,
make sure the bushing is not in the way.
Plug into the
USB port.
! Caution
Do not use other AC/DC
adapter than included.
Remove the mounting plate.
Lift up.
Power on.
Push.
Power on.
Plug in.
Wait for startup screen.
OPTEX Vision App
An internet connection is required.