INSTALLATION GUIDE

Wi-Fi router
SSID;
Password;
1
Collect information
- Ask the user for the Wi-Fi SSID and password.
Record them on the two lines below.
- Peel the Device ID (DID) QR code from the mounting plate of the IVPC-DS and place on the space provided below.
- Note the location name, changed Device password and Admin password set during the installation.
- Hand the user this page when the installation process is finished for their record.
Device password: default 123456
It is used when pairing the IVPC-DS with the IVPC-MS or a device running the OPTEX Vision App.
It is necessary to change at the first pairing.
Admin password: default 123456
Used when changing settings. It is necessary to change after the first settings change.
What to expect
Collect information;
to register (pair) the IVPC system to the Wi-Fi network.
Set up for pairing;
prepare each device for the pairing processes.
Pair the IVPC-DS;
pair the IVPC-DS to the IVPC-MS or a device running the OPTEX Vision App and test them.
Choose the location;
check the installation site to see if it meets performance needs.
Mount the IVPC-DS;
install on the site.
Confirm operation;
final check of the operations and customize settings if necessary.
1
2
3
4
5
6
Place DS #1
QR Code
Place DS #2
QR Code
Place DS #4
QR Code
Place DS #5
QR Code
Place DS #6
QR Code
- 2 -
AC/DC adapter
(micro USB)
Volume UP/DOWN
(7 steps)
Power ON/OFF
Speaker
Micro USB port
(for battery charge)
Unused
Micro SD card slot
Microphone
< Accessories >
7-inch
Stand
IVPC-MS
Location name
Admin. password
Device password
Place DS #3
QR Code
NOTE
Wi-Fi direct
SSID; RVDP- xxxxxxxx
Password;
12345678
For iOS only
When using a device operated by iOS,
following password may be required for pairing.