Datasheet

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: [phone] or [phone] FAX: [phone] [e-mail] www.optekinc.com
Issue C 05/2012
Page 2 of 3
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Optically Coupled Isolator
OPI110, OPI1264 Series
Absolute Maximum Ratings (T
A
= 25
o
C unless otherwise noted)
Storage Temperature
(1)(2)
-40° C to +100° C
Operating Temperature -40° C to +85° C
Input-to-Output Isolation Voltage ± 10 kVDC
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
(3)
260° C
Input Diode
Forward DC Current
(4)
40 mA
Reverse DC Voltage 2 V
Power Dissipation
(5)
50 mW
Output Photosensor
Collector-Emitter Voltage
OPI110, OPI1264
30
15
Power Dissipation
(6)
100 mW
Emitter-Collector Voltage 5
Notes:
(1) Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF.
(2) UL recognition is for 3500 VAC for one minute.
(3) RMA flux is recommended. The duration can be extended to 10 seconds maximum when flow soldering.
(4) Derate linearly 0.67 mA/°C above 25°C.
(5) Derate linearly 0.83 mA/°C above 25°C.
(6) Derate linearly 1.67 mA/°C above 25°C.
OPI1264
1 4
2
3
INCHES
[MILLIMETERS]
DIMENSIONS ARE IN:
OPI110
1 4
2
3