Datasheet

ManualsBrandsOptek ManualsOptical DetectorsReflective Object Sensor 15 V 890 nm

OPB700 and OPB700ALZ sensors consist of an infrared eming diode and a NPN silicon phototransistor, mounted side-by-

side on converging opcal axes in a black plasc housing.

OPB701 and OPB701ALZ sensors consist of an infrared eming diode and a NPN silicon photodarlington, mounted side-by-

side on converging opcal axes in a black plasc housing.

The interconnect wires for these devices are are UL approved #26 AWG, with Teon insulaon, stripped and nned. The

OPB700 and OPB701 have 4” (101 mm) wire length while the OPB700ALZ and OPB701ALZ have 18” (457 mm) wire length.

Custom electrical, wire, cabling and connectors are available. Contact your local representave or OPTEK for more

informaon.

 Non-contact reecve object sensor

 Assembly line automaon

 Machine automaon

 Machine safety

 End of travel sensor

 Door sensor

 Low prole to facilitate stacking

 Low cost plasc housing

 Choice of phototransistor or photodarlington output

 #26 AWG lead wire in 4” (101 mm), or 18” (457 mm) lengths

Ordering Informaon

Part Number

LED Peak

Wavelength

Sensor

Reecon Distance

Inch (mm)

Lead Length /

Spacing

OPB700Z

890 nm

Transistor

0.200" (5.08mm)

4" / 26 AWG Wire

OPB700ALZ 18" / 26 AWG Wire

OPB701Z 4" / 26 AWG Wire

Darlington

OPB701ALZ 18" / 26 AWG Wire

RoHS

Summary of content (6 pages)

PAGE 1
    Low profile to facilitate stacking Low cost plastic housing Choice of phototransistor or photodarlington output #26 AWG lead wire in 4” (101 mm), or 18” (457 mm) lengths OPB700 and OPB700ALZ sensors consist of an infrared emitting diode and a NPN silicon phototransistor, mounted side-byside on converging optical axes in a black plastic housing.
PAGE 2
OPB700Z, OPB701Z [ MILLIMETERS] INCHES DIMENSIONS ARE IN: See Chart Reflective Surface Reflective Surface 4 3 2 1 4 3 2 1 Part Number Wire Length OPB701 OPB700Z 4” Min Color/Pin # LED Color/Pin # LED OPB700ALZ 18” Min Red-3 Anode White-2 Collector OPB701Z 4” Min Black-4 Cathode Green-1 Emitter OPB701ALZ 18” Min
PAGE 3
Storage Temperature Range -40° C to + 125° C Operating Temperature Range -40° C to + 100° C Lead Soldering Temperature 260° C Input Diode Continuous Forward Current 100 mA Reverse Voltage 2V Power Dissipation(1) 80 mW Output Phototransistor Collector-Emitter Voltage OPB700Z, OPB700ALZ OPB70Z1, OPB701ALZ 24 V 15 V Emitter-Collector Voltage 5V Power Dissipation (1) 50 mW Notes: (1) Derate linearly 1.07 mW/°C above 25 ° C. Input Diode VF Forward Voltage - - 1.
PAGE 4
Coupled Parameters OPB700Z, OPB700ALZ (Phototransistor) IC(ON) Collector current VCE(SAT) ICX VCE = 5.0V(1), IF = 40mA 0.10 - 2.50 mA Saturation Voltage - - 0.40 V IC = 10µA, IF = 40mA Leakage Current - - 2.00 µA VCE = 5.0V, IF = 40mA, NO Reflective Surface 2.50 - 43.00 mA VCE = 5.0V(1) Saturation Voltage - - 1.10 V IC = 10µA, IF = 40mA Leakage Current - - 20.0 µA VCE = 5.
PAGE 5
OPB701 - Normalized Collector Current vs Forward Current vs Temperature OPB701 - Normalized Collector Current vs Distance 2.5 1.4 Normalized with Kodak 90% and Distance = 0.150" 1.2 Normalized Collector Current at 20mA and 20°C Normalized Collector Current Copier Paper 1.0 -40° C 2.0 Kodak 18% Avery Label Retro Reflective 0.8 0.6 0.4 -20° C 0° C 20° C 40° C 1.5 60° C 80° C 1.0 0.5 0.2 0.0 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.
PAGE 6
A A.1 B Initial Release—New Format Fixed pin-out. Fixed Kodak # E 152 7795, Updated mechanical drawing, added coupled specifications Transferred to the new TT Electronics template 03/08/06 Mark Miller 02/15/07 L.