Datasheet

Reflective Object Sensor
OPB608A, OPB608B, OPB608C, OPB608R, OPB608V
© TT electronics plc
Issue D 01/2017 Page 2
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: [phone]
www.electronics.com | sensors@electronics.com
General Note
TT Electronics reserves the right to make changes in product specicaon without
noce or liability. All informaon is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
Absolute Maximum Rangs (T
A
=25°C unless otherwise noted)
Storage Temperature Range -40° C to +85° C
Operang Temperature Range OPB608 A, B, C & R
OPB608V
-40° C to +85° C
0° C to +70° C
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]
(1)
260° C
Total Power Dissipaon 100 mW
OPB608A, OPB608B, OPB608C (Infrared-LED — 890 nm)
Forward DC Current 50 mA
Peak Forward Current (1 μs pulse width, 300 pps) 3 A
Reverse DC Voltage 2 V
OPB608R (Visible Red-LED — 650 nm)
Forward DC Current 50 mA
Reverse DC Voltage 5 V
OPB608V (Infrared-VCSEL — 850 nm)
Forward DC Current 12 mA
Reverse DC Voltage 5 V
Phototransistor
Collector-Emier Voltage 30 V
Emier Reverse Current 10 mA
Collector DC Current 25 mA
Notes:
(1) RMA ux is recommended. Duraon can be extended to 10 seconds maximum when ow soldering.
(2) Methanol or isopropanol are recommended as cleaning agents. The plasc housing is soluble in chlorinated hydrocarbons and keytones.
4 1
3 2
Pin # LED Pin # Transistor
4 Cathode 1 Collector
3 Anode 2 Emier