Datasheet

1 / 2
DMST
Non-Contact
Magnetostrictive Position Sensor
• Measuring range 100 - 5000 mm
• Modbus protocol
• 24 VDC power supply
DMST (mm)
IL
L
(Installation Length)
(Total Length)
198
348
100 150 200
298
250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1750 2000 2250 2500 3000 4000 5000
900 1000 1100 1200 1300 1400 1500 1750 2000 2250 2500 3000 4000 5000
248
398
348
498
448
598
548
698
648
798
748
898
848
998
948 1098 1198 1298 1398 1498 1598 1848 2211 2461 2711 3211 4211 5211
398 448 548 648 748498 598 698 798 848 898 948 998 1048 1098 1148 1248
37/53
1348 1448 1548 1648 1748 1998 2341 2591 2841 3361 4361 5361
Dead Zone Calculation
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850
ML
(Usefull Stroke)
L
M18x1,5
3/4’’-16 UNF
O-ring
100 µm
100 - 5000 mm
max. < 5 m/s
24 VDC ±10%
Modbus
10 ms (at 115200 bit/s)
RS422 / RS485
Baud rade Max. 115200 bit/s
25µm (100mm-400mm), 50µm (450mm-3000mm), 100µm (4000mm-5000mm)
Modbus
Measurement stroke
Resolution
Repeatability
Power supply
Output
Displacement speed
Max. comsumption
Linearity
Reverse polarity protection
Overvoltage protection
Update time
Interface
Diagnostic LEDs Green led : Power on, BUS communication active
Red led : Error, Stop mode
<100 mA (depending on stroke length)
Up to ±0,05% full scale (min.100 µm)
Up to -30 VDC
Up to +30 VDC
Technical Specifications
-10°C ... +70°C
IP 65Protection level
Operating temperature
Storage temperature
Mechanical Specifications
DS.DMST.MODBUS.ENG.12.05.23.AN
-30°C ... +90°C
5337
ML
MS
150
8
SW46
M4
11
8
A
A
Above given technical data are only for information purpose. OPKON has right to change product specifications without notice.