User's Manual
Table Of Contents
- 슬라이드 번호 1
- 슬라이드 번호 2
- 슬라이드 번호 3
- 1.2 . Summary & Features 1.2.1. Summary This signal booster can be installed on residential area, office, warehouse etc. . Following is advantages of using Five-band signal booster. This Signal booster solves coverage problems and improves connection quality in the building. In addition, this covers LTE of Band 12, Band 13, Cellular Band 5, AWS Band 4 and PCS Band 25 for mobile phone users. (Please see page 20 for operating frequency in details) 1.2.2. Features
- 슬라이드 번호 5
- 1.3 Functions
- _
- 슬라이드 번호 8
- 3. Installation 3.1 Installation Diagram
- 슬라이드 번호 10
- 슬라이드 번호 11
- 3.4 Installation Details
- 슬라이드 번호 13
- 슬라이드 번호 14
- 슬라이드 번호 15
- 슬라이드 번호 16
- 슬라이드 번호 17
- 슬라이드 번호 18
- 슬라이드 번호 19
- 슬라이드 번호 20
- 슬라이드 번호 21
- 슬라이드 번호 22
- 슬라이드 번호 23
Five-band Signal Booster For In-building
3.1.1. Install outdoor antenna on higher location to avoid any signal interference.
Mount towards to the BTS where a clear line-of-sight path exists for optimal
signal level.
3.1.2. Install indoor antenna at appropriate location such as wall or roof ceiling.
Make sure service antenna is not blocked by furniture or appliances.
3.1.3. Use enclosed bolt to fix a booster on the wall and plug in power adaptor.
3.1.4. For best optimal operation, antenna isolation (oscillation level) should be
set above minimum 15 dB gain. The industry standard for antenna to antenna
isolation formula is BDA gain + 15 dB.
3. Installation
3.1 Installation Diagram
USHR-781921-5B
- 9 -
Indoor Antenna
Out Door Antenna
Base satation