User's Manual
Table Of Contents
- 슬라이드 번호 1
- 슬라이드 번호 2
- 슬라이드 번호 3
- 1.2 . Summary & Features 1.2.1. Summary This signal booster can be installed on residential area, office, warehouse etc. . Following is advantages of using Five-band signal booster. This Signal booster solves coverage problems and improves connection quality in the building. In addition, this covers LTE of Band 12, Band 13, Cellular Band 5, AWS Band 4 and PCS Band 25 for mobile phone users. (Please see page 20 for operating frequency in details) 1.2.2. Features
- 슬라이드 번호 5
- 1.3 Functions
- _
- 슬라이드 번호 8
- 3. Installation 3.1 Installation Diagram
- 슬라이드 번호 10
- 슬라이드 번호 11
- 3.4 Installation Details
- 슬라이드 번호 13
- 슬라이드 번호 14
- 슬라이드 번호 15
- 슬라이드 번호 16
- 슬라이드 번호 17
- 슬라이드 번호 18
- 슬라이드 번호 19
- 슬라이드 번호 20
- 슬라이드 번호 21
- 슬라이드 번호 22
- 슬라이드 번호 23
Five-band Signal Booster For In-building
IV. UL Path Automatic Sleep Mode (continue )
• Automatic Turn Off / if UL PATH < -90dBm
• Automatic Turn On / if UL PATH > -88dBm
**All path gain limits are independently controlled
V. Oscillation Auto Prevention
• Degradation Protection: Detects potential performance degradation
due to the overload signal feedback (over-heating) signals by isolation
check & gain configuration.
• Feedback Limits: Sets the operating range to exceeding high level
signals from donor antenna (outside antenna) of a signal booster to
service antenna (inside antenna)
Booster Gain < Antenna to Antenna Isolation – 15dB
If optimal isolation gain is not attained, Relevant path shuts off
automatically.
**All bands are independently controlled
- 7 -