User's Manual

Five-band Signal Booster For In-building
1. INSTRODUCTION
1.1. Precautions
1.1.1 Do not drop the device
- It may damage the product and its function
1.1.2 Do not place near magnetic material
- It may cause possible malfunction
1.1.3 Product is recommended to be used with included AC/DC adapter
- It may cause possible malfunction
1.1.4 Install the product where it is recommended
- It may not properly operate if it is not recommended location
1.1.5 Do not disassemble/ repair the product
- Warranty may void once you disassemble the product.
1.1.6 Turn off the device immediately if a smoke or any strange odor is
detected from the product.
1.1.7 Use included bolts to install on the wall. Make sure it is safely
installed before operation
1.1.8 Outside Antenna must be installed no longer than 32 feet(10 meter)
above ground
1.1.9 This signal boosters are designed to be operated in a
designated area in a building.
Reference : Direction/Information for the proper operation
Cautions : Information for users to avoid malfunctions
Warning : Instruction for users to avoid unexpected hazard
- 3 -
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have
your provider’s consent. Most wireless providers consent to the use of signal boosters.
Some providers may not consent to the use of this device on their network. If you are
unsure, contact your provider. You MUST operate this device with approved antennas and
cables as specified by the manufacturer. Antennas MUST be installed at least 20cm (8
inches) from any person. You MUST cease operating this device immediately if requested
by the FCC or a licensed wireless service provider. WARNING. E911 location information
may not be provided or may be inaccurate for calls served by using this device.
This is a CONSUMER device.