User's Manual
Table Of Contents
- Users Guide & Installation Manual
- 슬라이드 번호 2
- 슬라이드 번호 3
- 1.2 . Features 1.2.1. Summary This device may be installed on residential area, office, warehouse etc. . Following is advantage of using in-building repeater system. This is RF type amplifier for 700 MHz LTE of Band 12 and Band 13 signal enhancement. (Please see page 13 for Operating Frequency in details) 1.2.2 . Features
- 1.2.3. Function
- 1.2.3. Function
- 슬라이드 번호 7
- 3. Installation 3.1. Installation diagram
- 슬라이드 번호 9
- 슬라이드 번호 10
- 슬라이드 번호 11
- 슬라이드 번호 12
- 슬라이드 번호 13
- 슬라이드 번호 14
1.2.3. Function
Page 4
IV. UL PATH Automatic Sleep Mode (continue )
• Automatic Turn OFF / if UL PATH < -92dBm
• Automatic Turn ON / if UL PATH > -90dBm
**BAND 12 & BAND 13 PATH gain limits are independently controlled
V. Oscillation Auto Prevention
• Degradation P
rotection: Detects potential performance degradation due to
the overload LTE feedback (over-heating) signals by Isolation Check & Gain
Configuration.
• Feedback Limits:
Sets the operating range to exceeding high level Signals
from Donor Antenna (external antenna) of a signal booster to Service
Antenna (internal antenna)
BDA Gain < Antenna to Antenna Isolation – 15dB
If optimal isolation gain is not attained, PATH OFF shuts off automatically
**BAND 12 & BAND 13 Uplink PATH are independently controlled