User's Manual
Table Of Contents
- Users Guide & Installation Manual
- 슬라이드 번호 2
- 슬라이드 번호 3
- 1.2 . Features 1.2.1. Summary This device may be installed on residential area, office, warehouse etc. . Following is advantage of using in-building repeater system. This is RF type amplifier for 700 MHz LTE of Band 12 and Band 13 signal enhancement. (Please see page 13 for Operating Frequency in details) 1.2.2 . Features
- 1.2.3. Function
- 1.2.3. Function
- 슬라이드 번호 7
- 3. Installation 3.1. Installation diagram
- 슬라이드 번호 9
- 슬라이드 번호 10
- 슬라이드 번호 11
- 슬라이드 번호 12
- 슬라이드 번호 13
- 슬라이드 번호 14
Page 11
Gain
Control
Range
ALC
Down Link 0dB ~ 14dB / 1dB step @ Band12
- be controlled GUI or Dip Switch
- Total Atten control Range :
0dB ~ 25dB / 1dB Step
(Both DL and UL are the same)
Up Link 0dB ~ 25dB / 1dB step @ Band13
Dip Switch
Down link 0dB ~ 25dB / 1dB Step
Up link 0dB ~ 25dB / 1dB Step
Gain Control Deviation < ± 1dB
EVM < 7% No Feedback
ACLR (± 10MHz)
Down Link ≥ 38dB LTE DL 5MHz 25RB
Up Link ≥ 32dB LTE UL 5MHz 25RB
Isolation checking Range
47dB ~ 75dB / BAND12
Detecting deviation: < ±2.0dB
47dB ~ 75dB / BAND13
In band Spurious
(Operating band unwanted emissions)
Category A 3GPP TS 36.106
Out Band Spurious
< -13dBm/1kHz RBW 9kHz ~ 150kHz
< -13dBm/10kHz RBW 150kHz ~ 30MHz
< -13dBm/100kHz RBW 30MHz ~ 1GHz
< -13dBm/1MHz RBW 1GHz ~ 12.75GHz
3rd IMD < -19dBm
Frequency Stability ≤ ±0.01ppm
GUI Interface RS-232C
Power Consumption < 15 W
Operating Power AC/DC Adapter(AC110V or AC220V)
RF Connector N-type Female
● Additional Information:
This repeater is a bi-directional amplifier for the boosting of cellular phone signals
and data communication devices.
The following frequency bands and emission types are utilized.
Frequency Band
Uplink
698 ~ 716 MHz 776 ~ 787 MHz
Downlink
728 ~ 746 MHz 746 ~ 757 MHz
Emission Designators
CDMA HSPA LTE EVDO EDGE GSM
F9W F9W G7D F9W G7W GXW