Dual Band Repeater Manual Model : US HR- 0819S S This document contains confidential and proprietary information that belongs to ACE Antennas. Using any of the information contained herein or copying or imaging all or part of this document by any means is strictly forbidden without express written consent of ACE Antennas. A CE A ntenna Corp.
Content 1. S ystem Introduction 2. S pecifications 2.1 Electrical S pecification 2.2 Mechanical Specification 2.3 Environmental Specification 2.4 Functional S pecification 3. S ystem Functions 3.1 Operation and Monitoring Functions 3.2 Characteristics and Features 4. Installation 4.1 Introduction 4.2 S ystem C omponents 4.3 Installation Location 4.4 Installation Method 5. Trouble S hooting 6. Drawings 7. Marks and Packaging 7.1 Outside Markings 7.2 Packaging Method A CE A ntenna Corp.
1. S ystem Introduc tion This unit is a repeater for the US C ellular and PC S frequenc ies. The unit allows c overage in areas where the base station signals are weak. The unit is installed between the base station and the mobile phone and allows better mobile phone c overage by amplifying weak base station signals. ㅤ Main F eatures - To maintain c onstant power level, automatic level c ontrol (ALC ) func tion is used.
2.
Item Repeater Total Description Dimensions(L*W*H) Weight S pecifications 119*156*33(mm) <1.5Kg Note 포장재포함 2.3 Environmental Specification Item S pecifications Temperature Humidity - 10℃ ~ 40℃ 5% ~ 95% Note 2.4 Functional S pecification a. On exc essive input power or if osc illation starts, auto shutdown proc ess begins separately for eac h C ellular and PC S module in the US HR- 0819S S . b. To maintain c onstant power level, automatic level c ontrol (ALC ) func tion is used. c .
US HR- 0819S S features and func tions are desc ribed below. 3.1 Operation and Monitoring Functions 3.1.1 This unit uses 3 LED display to distinguish its operating modes. The green LED indic ates that power is ON. The red LED for the 800 or the 1900 band is displayed only when that module is shutdown. When the unit is initializing, all three LED lights blink 1 to 3 times. 3.1.2 To maintain c onstant power level, automatic level c ontrol (ALC ) func tion is used.
4.1 Introduction The optimal installation method is explained below. 4.2 S ystem C omponents This unit c onsists of the power adapter, the signal repeater, and wall mount bolts. Please c hec k to make sure that you all parts listed here. 4.3 Installation Location In areas where the base station signal is weak. A CE A ntenna Corp.
4.4 Installation Method Loc ate an area in the building or in the room where the downlink signal (base station to mobile phone) is weak. Then, install the unit on the wall using the wall mount bolts. Mount i ng Bracket Adapt er Pl ug- I n Vehicle Mounted External Antenna (optional , if available) A minimum separation distanc e of 8 inc hes (20c m) must be maintained between the user/bystander and the vehic le mounted external antenna to satisfy F C C RF exposure requirements.
6. Drawings 7. Marks and Packaging 7.1 Outside Markings z The unit should display the manufac turer’s logo and it may also display the c ustomer’s logo. z The unit should display the model, the serial number, and F C C C ertific ation number. 7.2 Packaging Method z To protec t from shipping, the unit should be pac ked using the export standard pac king proc edure.
A CE A ntenna Corp.
